Roofing and Siding Trim, Corrugated Metal Roofing Panels, Metal Roof Trim

You are here: Home > TRIMS > Imperial Rib, Ameri-Drain, 5V Crimp & Corrugated Panels

Sort By:

Page of 2


PLAIN RIDGE CAP Base Price $31.20	CUSTOM TRIM Base Price $6.10	RIDGE & HIP CAP Base Price $30.90

Plain ridge cap Length = 10 feet 6 inches Default Size: X=4" / Girth=14-1/2" Default Roof Pitch = 4/12 (please specify roof pitch if different than 4/12) Gauge = 29 IMPORTANT NOTE RE THIS ITEM: If you are are ordering this item without also ordering metal roofing / siding / liner panel, please note that delivery must be made via full-sized rig and a $100 jobsite delivery fee will apply to the whole order (The $100 delivery fee is for the entire order and is charged only once). This item is too large to be shipped via common carrier i.e. UPS or FedEx.	"Z" metal Length = 10 feet 6 inches Girth = 3 inches Gauge = 29	Ridge & hip cap Length = 10 feet 6 inches Default Size: X=6" / Girth=13" Default Roof Pitch = 4/12 (please specify pitch if different than 4/12) Gauge = 29 ** Specify Open Hem when using Continuous Cleat (Item # MMR-CF123) IMPORTANT NOTE RE THIS ITEM: If you are are ordering this item without also ordering metal roofing / siding / liner panel, please note that delivery must be made via full-sized rig and a $100 jobsite delivery fee will apply to the whole order (The $100 delivery fee is for the entire order and is charged only once). This item is too large to be shipped via common carrier i.e. UPS or FedEx.


DENVER PEAK TRIM Base Price $30.60	DENVER ENDWALL FLASHING Base Price $21.20	SIDEWALL FLASHING Base Price $17.95

Peak trim Length = 10 feet 6 inches Girth = 11 inches Made to specified angle Gauge = 29	Endwall flashing Length = 10 feet 6 inches Girth = 9 3/4 inches Made to specified angle Gauge = 29	Sidewall flashing for metal roofs Length = 10 feet 6 inches Girth = 8 3/4 inches Gauge = 29


DENVER SIDEWALL FLASHING Base Price $19.00	DOOR & EDGE CAP Base Price $28.25	3" x 3" CORNER TRIM Base Price $21.65

Denver sidewall flashing Length = 10 feet 6 inches Girth = 8 1/4 inches Gauge = 29	Door & edge cap for metal buildings Length = 10 feet 6 inches Girth = 6 1/2 inches Gauge = 29	3" x 3" corner trim for metal buildings Length = 10 feet 6 inches Girth = 10 inches Gauge = 29


INSIDE CORNER TRIM Our Price: $30.20	SHINGLE RAKE TRIM Our Price: $25.65	DENVER GABLE Our Price: $23.60

Inside corner trim for metal buildings Length = 10 feet 6 inches Girth = 9 1/2 inches Gauge = 29	Shingle rake trim Length = 10 feet 6 inches Girth = 9 1/2 inches Gauge = 29	Denver gable trim for metal roofs Length = 10 feet 6 inches Girth = 11 1/4 inches Gauge = 29


EAVE FLASHING Our Price: $21.95	DENVER EAVE TRIM Our Price: $15.25	9 1/4" DOOR JAMB Our Price: $28.15

Eave flashing Length = 10 feet 6 inches Girth = 9 1/2 inches Made to specified angle Gauge = 29	Denver eave trim Length = 10 feet 6 inches Girth = 6 1/4 inches Made to specified angle Gauge = 29	9 1/4" door jamb trim for metal buildings Length = 10 feet 6 inches Girth = 9 1/2 inches Gauge = 29


SLIDING DOOR DRIP CAP Our Price: $18.70	TRACK DOOR JAMB TRIM Base Price $36.65	KEYSTONE PIECE Our Price: $8.25

Sliding door drip cap for metal buildings Length = 10 feet 6 inches Girth = 5-1/4 inches Gauge = 29	Track door jamb trim for metal buildings Length = 10 feet 6 inches Girth = 11-5/8 inches Gauge = 29	Keystone piece for metal buildings Size: 13-3/4" X 18" Must be field cut to match roof pitch Gauge = 29


ROLL VALLEY / FLAT STOCK IN COIL Base Price $185.00	NOTCHED ENDWALL FLASHING Base Price $13.95	NOTCHED UPPER GAMBREL FLASHING Base Price $13.95

Roll valley / flat stock in coil for metal roofs Length = 50 feet Girth = 20 3/16 inches Gauge = 29	Endwall flashing for metal roofs Length = 3 feet Girth = 12 inches Made to specified angle Notched to match panel configuration Gauge = 29	Upper gambrel flashing for metal roofs Length = 3 feet Girth = 12 inches Notched to match panel configuration Gauge = 29


NOTCHED LOWER GAMBREL FLASHING Base Price $13.95	BASE TRIM Base Price $11.45	SQUARE BASE ANGLE FLASHING Base Price $13.60

Lower gambrel flashing for metal roofs Length = 3 feet Girth = 12 inches Notched to match panel configuration Gauge = 29	Base trim for metal walls / cladding Length = 10 feet 6 inches Default Size: X = 1" / Z = 1-13/16" / Girth = 4-13/16" Gauge = 29	Square base angle flashing for metal roofs Length = 10 feet 6 inches Default Size: X = 1" / Girth = 4 3/4" Gauge = 29


CORNER TRIM Base Price $23.10	RAKE TRIM Base Price $34.75	CUSTOM SOFFIT Base Price $47.85

Corner trim flashing for metal buildings Length Options: 10' 6", 12' 6", 14' 6", 16' 0" Girth = 12 1/2 inches Gauge = 29	Rake trim for metal roofs Length Options: 10' 6" and 16' 0" Girth: 14 1/2 inches Gauge = 29	Custom pre-painted Galvalume steel soffit Length: 10 feet 6 inches Default Size: X = 12" / Girth = 20" Gauge = 29


"J" CHANNEL Base Price $13.55	DOOR POST TRIM Base Price $15.30	"L" CHANNEL Base Price $14.70

"J" channel Length Options: 10' 6" or 16' 0" Girth Options: 3-7/8" or 4" Throat Options: 7/8" or 1.0" Gauge = 29	Door post trim for metal buildings Length Options: 10' 6" or 16' 0" Default Size: X = 3-1/2" / Girth = 5-1/2" Gauge = 29	"L" channel for metal buildings Length: 10 feet 6 inches Default Size: X = 1" / Girth = 3-1/2" Gauge = 29

Mailing List Subscribe

Connect

Shop By Category

Mailing List Subscribe