Mackey Metal Roofing Inc.

Shopping Cart0 item(s) / Total: 0.00

SHOP

Mackey Metal Roofing Installation Training Resources

Testimonials

David,

I want to thank you for your outstanding service and attention to detail on this order. I will be starting an additional project within the next few years and I will not hesitate to use your service once again.

Thank you again.

Derek P – San Jose, CA

Home > Metal Roof & Siding Paint >

CALBAR ALKYD METAL PRIMER (1 GALLON CAN)

Quick Drying
Voc Compliant
Excellent Adhesion
Flexible, Corrosion Resistant
Brush, Roll or Spray

Price Per Gallon $51.00

Availability: Usually Ships in 24 to 48 Hours
Product Code: MMR-ROOFPRIMER-10520

Packaging

Calbar Packaging*:

Qty:

Description

Technical, Warranty & Return Info.

Shipping / Lead Times

Calbar 10-520 Metal Primer - Fast Drying, Longer Lasting, Easy to Apply

Quick Drying
Voc Compliant
Excellent Adhesion
Flexible, Corrosion Resistant
Brush, Roll or Spray On

MAINTENANCE:
- Damaged areas may be repaired using Calbar Roof Sealer (CRS). Please refer to the appropriate data sheet for this product.
TECHNICAL DATA:
- Adhesion Shear Strength: 600 PSI
- Peal Strength: 35 PSI
- Impact Adhesive: 1100 PSI
- Resistance to Rust: Satisfactory
- Viscosity @ 70º F: 70 KU
- Dry Time @ 80º F (70% RH): 2 hours to re-coat
- Total Cure @ 80º F (70% RH): 2 hours
- Solids Content: 70% 2
- Application Equipment: Brush or spray
- Cleaning of Equipment: Xylene
LIMITATIONS:
Areas with rush must be spot primed. A test patch should be applied to any roof that has been coated with a factory finish. We strongly recommend that proper adhesion to your factory finish be tested using the Adhesion Tape Test as defined by ASTM D-3359.
PRECAUTIONS:
Apply only at temperatures from 40º F to 90º F (air and surface). Do not paint if rain is forecast within the tack-free time. Starting after 10am and stopping by 4pm gives best results. Condensation on wet paint film will flatten the finish of the coating prematurely and unevenly, but does not affect adhesion or durability. Never paint over condensation. Painting at temperatures above 90º F will cause all coatings to dry too quickly, resulting in poor adhesion and flexibility. Refer to the Material Safety Data Sheet for complete health and environmental information.
SPECIFICATION REFERENCES:
- ASTM D3322-82
- ASTM D-610-85
- ASTM E96
- ASTM D-412
- ASTM C-711
- ASTM D-2240
- ASTM D-154-79
- ASTM D-446
- ASTM D-1044
WARRANTY:

This product is accompanied by a manufacturer warranty which is detailed as follows:

"The manufacturer warrants its coatings and sealants to be free from defects in materials, but makes no warranty as to appearance or color. Since surface preparation, method of application, environmental and other on-site conditions are beyond their control and can and do affect the performance of this product, the manufacturer makes no other warranty, expressed or implied, including warranties of merchantability or fitness for a particular purpose, with respect to the manufacturer's sealants and coatings. The manufacturer's sold obligation shall be, at its option, to replace this product or refund the purchase price of the quantity of Calbar coatings or sealants proved to be defective. The manufacturer shall not be liable for any loss or damage including incidental or consequential damage arising from the use of Calbar products."

Features

Calbar 10-520 metal primer offers superior rust protection and adhesion that is unique for an alkyd type primer when top-coated with the Calbar line of roof paints.
- Coverage: 400 square feet per gallon, depending on the surface of the metal and texture.
- Dry-Time: Dries in 2 hours at 70 deg F, 50% Relative Humidity
- Colors: Red Oxide
- Clean-Up: Solvent-based agent (Xylene, paint thinner, turpentine)
- Packaging: 1 gallon, 5 gallon, 55 gallon
- Tinting: Not Recommended
- Thinning: Not Recommended
- Stirring: Stir the paint thoroughly, immediately before using and frequently during application.
- Coating Type: Solvent based air dry
- V.O.C.: 150 grams / liter
- Pot Life: Single component
- Shelf Life: 24 months
- Required Thickness: 3 wet mil per coat
MAINTENANCE:
- Damaged areas may be repaired using Calbar Roof Sealer (CRS). Please refer to the appropriate data sheet for this product.

Share your knowledge of this product with other customers... Be the first to write a review

Browse for more products in the same category as this item:

Metal Roof & Siding Paint
New Products
Top Sellers

	CALBAR SHOWER-PROOF WB (WATER-BASED) METAL ROOF PAINT (5 GALLON PAIL) $232.50
	1/8" STAINLESS STEEL RIVET (BARE OR PAINTED) $0.10
	5/16" HEX STAINLESS STEEL BI-METAL ROOF FASTENER $0.32
	1" PANCAKE HEAD FASTENER (Plated Only) $0.10
	SLIM-LINE (SL) 16" WIDE - 26 GAUGE - CONCEALED FASTENER SNAP-LOCK ROOF PANEL Price Per Covered Square Foot (Painted): $1.88
	CORRUGATED - 29 GAUGE - 24 IN COVERAGE - EXPOSED FASTENER ROOF & SIDING PANEL Price Per Covered Square Foot: $0.87
	AMERI-DRAIN - 29 GAUGE - 36 IN COVERAGE - EXPOSED FASTENER ROOF & SIDING PANEL Price Per Covered Square Foot (Painted): $0.89
	5V CRIMP - 29 GAUGE - 24 IN COVERAGE - EXPOSED FASTENER ROOF & SIDING PANEL Price Per Covered Sq. Ft.: $0.87
	"Z" METAL $8.20