No Credit Card Surcharges
No Additional Transfer or Hidden Fees
0 

Low Cost Shipping

$100 On Most Panel Orders
Standard UPS Charges on Accessories & Standalone Trim
You are here: Home > TRIMS > Slim-Line (SL) Panel
Sort By:
Page of 1
Metal Roof Ridge Cap for Metal Roof Systems PANEL CAP EAVE TRIM
PLAIN RIDGE CAP
Base Price $25.20
PANEL CAP
Base Price $8.60
EAVE TRIM
Base Price $15.75
  • Plain ridge cap
  • Length = 10 feet 6 inches
  • Default Size:  X=4" / Girth=14-1/2"
  • Default Roof Pitch = 4/12 (please specify roof pitch if different than 4/12)
  • Gauge = 29
  • IMPORTANT NOTE RE THIS ITEM:  If you are are ordering this item without also ordering metal roofing / siding / liner panel, please note that delivery must be made via full-sized rig and a $100 jobsite delivery fee will apply to the whole order (The $100 delivery fee is for the entire order and is charged only once).  This item is too large to be shipped via common carrier i.e. UPS or FedEx.
  • Panel cap
  • Length = 10 feet 6 inches
  • Girth = 5 1/8 inches
  • Gauge = 29
  • Eave trim
  • Length = 10 feet 6 inches
  • Girth = 7 inches
  • Made to specified angle
  • Gauge = 29
  • **Specify Open Hem when using Continuous Cleat (Item # MMR-CF123)
RAKE GABLE TRIM FASCIA SOFFIT TRIM DRIP EDGE
RAKE GABLE TRIM
Base Price $16.10
FASCIA SOFFIT TRIM
Base Price $18.50
DRIP EDGE
Base Price $13.75
  • Rake gable trim
  • Length = 10 feet 6 inches
  • Girth = 7 1/4 inches
  • Gauge = 29
  • Fascia soffit trim
  • Length = 10 feet 6 inches
  • Girth = 8 5/16 inches
  • Gauge = 29
  • Drip edge
  • Length = 10 feet 6 inches
  • Girth = 7 3/8 inches
  • Gauge = 29
"Z" METAL UNIVERSAL SIDE WALL ENDWALL FLASHING
"Z" METAL
Base Price $6.10
UNIVERSAL SIDE WALL
Base Price $14.40
ENDWALL FLASHING
Base Price $14.85
  • "Z" metal
  • Length = 10 feet 6 inches
  • Girth = 3 inches
  • Gauge = 29
  • Universal side wall
  • Length = 10 feet 6 inches
  • Girth = 6 7/8 inches
  • Gauge = 29
  • Endwall flashing
  • Length = 10 feet 6 inches
  • Girth = 7 1/4 inches
  • Made to specified angle
  • Gauge = 29
OFFSET CLEAT CONTINUOUS CLEAT HIGHSIDE TRANSITION
OFFSET CLEAT
Base Price $6.10
CONTINUOUS CLEAT
Base Price $4.30
HIGHSIDE TRANSITION
Base Price $14.10
  • Offset cleat
  • Length = 10 feet 6 inches
  • Girth = 3 1/2 inches
  • Non-exposed: assorted colors may be used
  • Gauge = 29
  • Continuous cleat
  • Length = 10 feet 6 inches
  • Girth = 3 inches
  • Non-exposed: assorted colors may be used
  • Gauge = 29
  • Highside transition
  • Length = 10 feet 6 inches
  • Girth = 8 1/2 inches
  • Made to specified angle
  • Gauge = 29
RAKE TRANSITION "Z" METAL RAKE GABLE TRIM
RAKE TRANSITION
Base Price $14.95
CUSTOM TRIM
Base Price $6.10
  • Rake transition
  • Length = 10 feet 6 inches
  • Girth = 9 1/4 inches
  • Gauge = 29
  • "Z" metal
  • Length = 10 feet 6 inches
  • Girth = 3 inches
  • Gauge = 29
  • Rake gable trim
  • Length = 10 feet 6 inches
  • Girth = 7 1/4 inches
  • Gauge = 29
EAVE TRIM Ridge & Hip Cap Roofing Ridge Cap For Metal Roofing Systems Denver Peak Roofing Trim For Metal Roofing Systems
EAVE TRIM WITH DRIP EDGE
Base Price $15.75
RIDGE & HIP CAP
Base Price $26.65
DENVER PEAK TRIM
Base Price $18.75
  • Eave trim
  • Length = 10 feet 6 inches
  • Girth = 9-5/8 inches
  • Made to specified angle
  • Gauge = 29
  • Ridge & hip cap
  • Length = 10 feet 6 inches
  • Default Size:  X=6" / Girth=13"
  • Default Roof Pitch = 4/12 (please specify pitch if different than 4/12)
  • Gauge = 29
  • ** Specify Open Hem when using Continuous Cleat (Item # MMR-CF123)
  • IMPORTANT NOTE RE THIS ITEM:  If you are are ordering this item without also ordering metal roofing / siding / liner panel, please note that delivery must be made via full-sized rig and a $100 jobsite delivery fee will apply to the whole order (The $100 delivery fee is for the entire order and is charged only once).  This item is too large to be shipped via common carrier i.e. UPS or FedEx.  
  • Peak trim
  • Length = 10 feet 6 inches
  • Girth = 11 inches
  • Made to specified angle
  • Gauge = 29
Denver Endwall Flashing Roofing Trim For Metal Roofing Systems Denver Gable Metal Roof Trim Roll Valley Flat Stock For Metal Roofs and Metal Roof Installation
DENVER ENDWALL FLASHING
Base Price $14.85
DENVER GABLE
Our Price: $20.25
  • Endwall flashing
  • Length = 10 feet 6 inches
  • Girth = 9 3/4 inches
  • Made to specified angle
  • Gauge = 29
  • Denver gable trim for metal roofs
  • Length = 10 feet 6 inches
  • Girth = 11 1/4 inches
  • Gauge = 29
  • Roll valley / flat stock in coil for metal roofs
  • Length = 50 feet
  • Girth = 20 3/16 inches
  • Gauge = 29
W Formed Valley Metal Roofing Materials For Metal Roof Systems Flat Sheet Metal Roofing Materials For Metal Roof Systems Style D Eave Metal Roof Trim For Metal Roof Systems
"W" FORMED VALLEY
Base Price $38.00
FLAT SHEET / TRIM SHEET
Our Price: $36.30
"D" STYLE EAVE TRIM
Our Price: $10.80
  • "W" formed valley for roofs
  • Recommended Size:  X=14" (especially for projects located in snow country)
  • Length: 10 feet 6 inches
  • Gauge = 29
  • Note:  A skid charge of $42.00 will be applied to 9 or more sheets.
  • Flat sheet / Trim sheet for metal roofs
  • Length = 10 feet 6 inches
  • Girth:  Bare Galvanized & Color = 40-7/8"
  • Girth: Bare Galvalume Plus = 44-1/2"
  • Gauge = 29
  • Style "D" eave trim
  • Length = 10 feet 6 inches
  • Girth = 5 1/8 inches
  • Made to specified angle
  • Gauge = 29
Pitch Transition Flashing For Metal Roof Repairs and Metal Roof Installation
PITCH TRANSITION FLASHING
Our Price: $41.46
  • Pitch transition flashing
  • Length = 10 feet 6 inches
  • Girth = 19 inches
  • Made to specified angle
  • Gauge = 29
   
 

Mailing List Subscribe

Copyright © 1999 - 2015 Mackey Metal Roofing Inc. All Rights Reserved.
Built with Volusion.   //   Designed By: Capacity Web Solutions